SHURE ULXD1-H51 Belt Transmitter - TA4M Belt Transmitter - 534-598 MHz

The range also gets two new transmitters; a surface mic transmitter with omnidirectional or cardioid pattern, and a tabletop base transmitter compatible with Microflex modular goosenecks.

The ULX-D digital wireless system range is intended for the most demanding performance and fixed installations.

The ULX-D system highlights

Digital audio

The 24-bit / 48 kHz digital audio processing ensures, with a frequency response of 20 Hz to 20 kHz and a dynamic range of more than 120 dB, an incredibly faithful and accurate reproduction of sound sources.

HF performance

The ULX-D series' RF signal stability and exceptional spectral efficiency allow up to 560 compatible frequencies to be used in one frequency band in High Density mode.

Signal encryption

256-bit signal encryption ensures privacy protection - for all installations where confidentiality is essential.

Networked control

Ethernet networking of multiple receivers allows use of Wireless Workbench 6 software, frequency coordination via the Axient Spectrum Manager, system control via AMX or Crestron, and Dante™ digital audio networking (except single receiver). Remote monitoring and control capability from an iOS device with the ShurePlus™ Channel app.

Rechargeable Ion-Lithium battery

The ULX-D transmitters can be powered by a rechargeable Ion-Lithium battery allowing time remaining display in hours and minutes with +/-15 minute accuracy while providing superior battery life.

The ULX-D series is available in VHF and UHF in the V51 (174-216 MHz), G51 (470-534 MHz), H51 (534-598MHz) and K51 (606-670 MHz) frequency bands.

Belt transmitter with TA4M 4-pin male TQG socket. ¼ wave antenna

detachable. Powered by two LR6 batteries or with an optional Lithium-Ion battery

SB900A.

- Additional Specs:

General Features

- Up to 72 MHz of RF bandwidth

- Up to 70 simultaneous systems per band in standard mode

- Up to 560 simultaneous systems per band in high density mode

- Fast frequency scanning

- Interference detection and alerts

- Transmitter synchronization via IR link

- Audio frequency response: 20 Hz to 20 kHz

- 24 bit - 48 kHz A/D and D/A converters

- Latency: 2.9 ms

- Management via PC or Mac with Wireless Workbench 6 software

- Remote monitoring with the ShurePlus™ Channel iOS app

- Compatible with DTT and 4G

Features of the ULXD1 and ULXD2 transmitters

- Switchable transmitter power 1, 10 and 20 mW

- Powered by two LR6 batteries or Ion-LithiumSB900A battery pack

- 11 hours autonomy with two LR6 batteries

- More than 11 hours autonomy with SB900A battery pack (10 mW)