SHURE MXA902W-S-60CM-USB Ceiling microphones - Pack MXA902W-S and ANIUSB-MATRIX Plug&Play

Integrating an array of capsules managed by a powerful IntelliMix DSP and articulated around the Dante digital audio network, Microflex Advance ceiling, linear and tabletop microphones make use of new software tools that enable conference room designers to be creative and easy to implement, and users to be more productive by forgetting about technical constraints.

It's now easier than ever to achieve high-quality, reliable sound in meeting rooms. Shure's pre-configured, pre-routed audio conference kit includes the MXA902 integrated ceiling microphone + speaker, paired with the ANIUSB-MATRIX audio network interface for a complete, plug-and-play audio solution.

Guarantee quality sound and full room coverage in small and medium-sized spaces, or extend the audio coverage of existing all-in-one room solutions in larger rooms, with fast, seamless connectivity to your preferred conferencing platform.

- Category: installation microphone

- Connectivity: RJ45

- Frequency response: 20 Hz - 20 kHz

- Additional specs:

MXA 902

- Multi-capsule microphone and loudspeaker in a single unit for superior sound quality with minimal installation time

- Single Zone Automatic Coverage™ technology enables audio pickup in a 6-by-6-meter area as soon as the microphone is unpacked

- Integrated loudspeaker, 2.5-inch (62,5mm) wide-coverage driver for clear, intelligible speech reproduction

- Integrated IntelliMix DSP with echo cancellation (AEC), noise reduction, automix, automatic gain control (AGC), equalization for echo-free, noise-free sound

- Square-shaped, 60cm square, in paintable white finish

- Various options for ceiling, pole or metal sling mounting

Includes:

1 MXA902W-S-60CM multicapsule microphone with speaker

1 Installation kit with:

8 Cable ties

3 Strain relief tabs

1 Set of rubber pads

ANIUSB-MATRIX Pre-configured

- Inputs: 4 Dante - 1 analog block connector - 1 USB 2.0 type B

- Outputs: 2 Dante - 1 analog connector block - 1 USB 2.0 type B

- Network connector: RJ45 Gigabit port

- Control application: Designer version 4 or higher

- Power supply: PoE - Class 0

- Consumption: 6.5 W maximum

- Recommended cable: Shielded Cat5e or higher

- Dimensions: 4 x 14 x 12.8 cm (H x W x D)

- Weight: 668 g

Audio

- Frequency response: 20 Hz to 20 kHz

- Dante digital channels: 4 inputs, 2 outputs

- Dante: 24 bits - 48 kHz

- USB: 16/24 bits - 44.1/48 kHz

- Latency: 0.98 ms (Analog to Analog)

0.39 ms (Analog to Dante)

0.72 ms (Dante to Analog)

0.14 ms (Dante to Dante)

- Equivalent input noise: -86 dBV (Line Level), -98 dBV (Aux Level)

- Dynamic range: 113 dBA (Analog to Dante)

117 dBA (Dante to Analog)

- Total Harmonic Distortion: < 0.05% (@1kHz, 0dBV, Gain 0dB)

- Analog Output Level:Line > 0 dB; Aux > -20 dB; Mic > -46 dB

- Signal processing: 4-band parametric equalizer on USB and analog channels, Mute, Limiter, Gain, Mix matrix