FOCUSRITE PRO REDNET-HD32R REDNET - 32 channels for Pro Tools HD

The RedNet family of interfaces has been designed to meet the needs of a wide range of audio applications-from live sound to multi-cabin recording studios, houses of worship, distributed audio installations, post-production environments, and everything in between. Fundamentally, RedNet is a highly scalable audio distribution system that offers near-zero latency and can be used to expand the number of inputs and outputs of digital audio systems and/or serve as a bridge between Pro Tools|HD, MADI protocol, and the Dante audio network. Featuring Focusrite's most advanced AD/DA conversion to date, an ultra-stable JetPLL clock, and high-end multilayer PCBs, RedNet is no exception to Focusrite's philosophy: Sound is everything. Designed and built with extreme attention to detail, RedNet interfaces are a step above the competition, delivering transparency and some of the best sound quality to date - combined with the revolutionary capabilities of networked audio systems.

The HD32R is a bi-directional interface that allows a ProTools|HD system to access a Dante network. Each unit functions as a 64 channel (32 in/ 32 out) interface and supports a wide range of Pro Tools|HDX and HD cards (up to 6 HD32R modules can be used with a Pro Tools|HDX and 3 with a Pro Tools|HD).

- Max resolution: 24-bit

- Category: audio

- Format: rack

- Software provided: Dante Controller, RedNet Control

- Interfacing: Dante, ProTools HD

- Power supply: Mains

- Compatibility: PC, Mac

- Dimensions (mm): 482 x 263 x 45

- MIDI interface: No

- Wordclock: Yes

- Phantom power: No

- Weight (kg): 5.75 kg

- Sampling rate: 192 kHz

- No. of inputs: 32

- No. of outputs: 32

- Additional specs: - Wordclock and Loop sync input and output

- 2 Mini-DigiLink ports (primary and expansion)

- 24-bit / 44.1kHz to 192kHz conversion

- Dynamic range up to 119dB

- LED indicators: network, resolution and mode (primary/expansion)

- 2 tricolour LEDs indicating signal in/out per set of 4 channels

- 2 Ethernet ports allowing connection with 2 independent networks

- 2 independent power supplies with 2 separate connectors (the second power supply remains on standby and takes over in case of failure of the first module)

- 1U rack format