SOLID STATE LOGIC SIX-CHANNEL-500 Format 500 - SiX mono channel module

The SiX Channel is a simple way to add additional mic/line inputs to the line-level inputs of any professional audio device, including the stereo channels of the SiX console. It is also a flexible way to create a professional modular mixer from a 500 Series rack unit.

SuperAnalogue Preamp Input:

A wide-gain, ultra-low noise SuperAnalogue design provides line and mic input with a "Line" switch to cover a wide range of input levels. The nominal impedance of the line input is 10 kΩ. It can be changed to 1 MΩ using the Hi-Z switch. The 1 MΩ impedance makes this input suitable for very high impedance sources, such as passive guitar pickups, without the need for an external direct box.

Other features:

- Switchable 12 dB/oct, 75 Hz high-pass filter (HPF)

- Polarity switch (ø) to reverse the polarity of the XLR input on the back of the rack

- A five-segment LED indicator shows the output signal level in dBu

EQ:

The EQ is a smooth, wide-range, two-band design with high and low step filters at 3.5 kHz and 60 Hz, adjustable from +15 dB to -15 dB of gain. Each band can be independently changed between bell or step curves. The bell curves change the center frequency to operate at 5 kHz and 200 Hz, giving greater versatility to both controls.

COMP:

A versatile one-button channel compressor with features that give powerful, versatile performance from its surprisingly simple controls. A three-LED meter indicates the amount of gain reduction applied. The circuit features automatic boost gain to maintain signal level for the full range of threshold settings.

- Category: 500 size

- No. of channels: 1