SSE MV-TWO-KIT-Z6
MoveMic is a new family of wireless microphones for today's content creators, videographers and field journalists. This solution features one- and two-channel wireless tie microphones, plus a separate receiver to give creators the ability to record on any device.
Coming soon in stock In stock
Warning: Last items in stock!
Availability date:
Two channel wireless system with 1 receiver, 2 lapel microphones and 1 charging case.
High-quality broadcast audio recording with or without receiver if used in Direct-to-phone world.*
* Direct-to-phone use is recommended only with MOTIV Video and Audio applications only.
Shure recommends using the MoveMic receiver for additional compatibility with third-party mobile applications.
Wireless receiver for MoveMic range.
Fits on camera or stills camera.
Screen with receiver and transmitter battery level display.
Transmitter modulation and input gain level meters
Connectivity:
Headphone output Mini-jack 3.5 mm
Line output Mini-jack 3.5 mm
USB-C
Charging box for 2 tie microphones.
Allows 2 additional charges of 8h autonomy for transmitters
Power supply via USB-C
2 windscreens included
Supplied with 2 USB-C cables and 1 stereo Mini-jack
- Category: complete tie system
- Max number of simultaneous systems: 2
- Frequency scanner: No
- Additional specs:
- Frequency response: 50-20Khz +/1Db
- Dynamic range (A-weighted): 100dB
- Equivalent input noise (A-weighted, Camera output = Line level): 31dB SPL
- Equivalent input noise (A-weighted, Direct to phone): 36dB SPL
- Max. sound pressure level. (SPL): 130dB SPL
- Sensitivity when used with MV-LAV (Microphone Gain = 0dB): -45dBV @94dBSPL
- Resolution: 24 Bit
- Sampling rate: 48ksps or 44.1ksps (depending on host device)
- Gain adjustment range: 0 - 60 dB
- Minimum load impedance- HP: 16 ohms
- Maximum headphone output level: 26.4mW @1% THD
- Minimum load impedance - Camera output: 2k ohms
- Max. output level. Camera (Microphone settings): -26dBV
- Max. output level. Camera (Line output setting): -8.3dBV
- Latency on 3.5mm output (without NR): 15.33 ms (delay 1 frame per second
- Latency on 3.5mm output (with NR): 17.33 ms
- Latency on USB output: dependent on host device
- Range: up to 30 meters in open field
- Weight and dimensions lapel microphone: 8.2gr, 46 x 22 x 15mm
- Weight and dimensions receiver case: 81gr, 65 x 67 x 19mm