FOCUSRITE PRO ISA-ADN2 ISA - ISA One 2 Channel ADAT/Dante AN Card

This provides the ability to synchronize the Dante network with the "Master" clock or external equipment with the Dante network.


Al Dante.

The ISA ADN2's Dante outputs provide the ISA One mic/DI preamp with network access to all Focusrite RedNet devices and Red interfaces, as well as any other Dante-compatible devices. Level ballistics and settings are accessible via RedNet Control, routing is configured using the Dante Controller app.


Focusrite warranty.

And as with all Focusrite Pro products, wherever you are in the UK, you can count on a three-year warranty if any Focusrite Pro hardware proves faulty, it is routinely replaced.

- Type: option card

- Category: other

- Additional specs: AUDIO PERFORMANCE

- 0DBFS reference level: 22dBu

- Frequency response: 20Hz - 20kHz ±0.1dB

- THD+N: -105dB (0.0006%), 20Hz - 20kHz; -1dBFS at input

- Signal to noise ratio: -121dBu

- Dynamic range: 121dB, 20Hz - 20kHz

DIGITAL

- Supported frequencies: 44.1/48/88.2/96/176.4/192 kHz (-4%/-0.1%/+0.1%/+4.167%) in 24 bit

- Clock sources: Internal or Word Clock

CROSSTALK (input to input): < -100dB; 20Hz - 20kHz (channel @ -20dBFS)

DANTE : 2x channels, on 2x RJ45 ports (Primary & Secondary)

AES3: 2x AES3 channels, output on 1x male XLR connector

ADAT

- 2x channels, output: 1x TOSLINK

- Channel assignment @ 44.1 KHz, 48 KHz, Port 1 = channels 1-2

- Channel assignment @ 88.2 KHz, 96 KHz: SMUX I, Port 1 = channels 1-2

- Channel assignment @ 176.4 KHz, 192 KHz : SMUX II, Port 1 = channels 1-2

S/PDIF

2x S/PDIF channels, output : 1x RCA phono

WORD CLOCK

- Input : 1x BNC 75O port (Switchable termination)

- Output : 1x BNC 75O port.