- MULTIMEDIA
- STUDIO EQUIPMENT
- MUSIC SOFTWARE
- GUITARS
- BASS
- WIRELESS MICROPHONES AND TRANSMITTERS
- INSTRUMENT STRINGS
- KEYBOARDS
- DRUMS and PERCUSSION
- DEEJAY
- SOUND EQUIPMENT
- CONFERENCE SYSTEMS
- LIGHTING
- CABLES and CONNECTORS
- VIDEO
- WIND INSTRUMENTS
- STRING QUARTETS
- TRADITIONAL INSTRUMENTS
- OUR BEST SELLERS
- STORE FITTINGS
RADIAL ENGINEERING X-AMP Direct Boxes - Active Reamper
Direct Boxes - Reamper active
This process allows you to take a pre-recorded track, send it back to a guitar or bass amplifier and re-record the take in a more conventional way using mics.The benefits are huge: instead of worrying about the sound of the track, you can focus your attention on getting the best musical performance. Once the magic is captured, you can feed the signal back into the guitar amp.So you can move the pickups around as you please so that the recording is optimized, try out different amplifiers or apply effects.
The X-Amp Radial is an active re-amp that allows you to feed the signal from a recorded "dry" guitar back into an amp or effects chain.The X-Amp uses a Class A active circuit to reproduce all the sonic nuances of the original performance. The X-Amp accepts a balanced +4dBu input signal on an XLR connector and outputs two unbalanced instrument-level outputs for connecting effects and/or amps. To avoid ground loops between the recorder and the amps, the XLR input has a "ground lift" switch. The X-Amp allows the simultaneous use of 2 amps. The 2nd amp output is buffered to avoid signal loss, is transformer isolated to avoid hum caused by ground loops and has a polarity switch to align the phase of the amps with each other. The level potentiometer and clip LED help to set levels quickly and avoid switching back and forth between the console and amp.The X-amp makes the reamping process really easy, its excellent audio quality will give you great sounding results and when coupled with a J48, you have the best reamp kit in the world!Applications:+ Line level to instrument level conversion+ Interface recording devices with amps and effects pedals+ Re-amping
- THD: 0.02%
- Display: LED
- Signal-to-noise ratio: 88 dB ss instr level. (-20 dBu)
- Category: reamp
- Digital conversion: no
- Inputs: XLR
- Outputs: 2 x jack
- Settings: Ground switch, phase inverter, output level
- Power supply: DC 15 V
- Frequency response: 20 Hz - 15 kHz
- Dimensions (mm): 84 x 127 x 48
- Weight (kg): 720 g
- Lights: No
- Built-in preamp: No
- Max input level (dBu): 22
- No. of channels: 1
- Additional specs: - Technology: active class A discrete
- Dynamic range: 119 dB
- Input impedance: 600 Ω symmetrical
- Very sturdy construction: 1.29 mm steel chassis
Specific References
- SRA X-AMP
- 0676101034901