- MULTIMEDIA
- STUDIO EQUIPMENT
- MUSIC SOFTWARE
- GUITARS
- BASS
- WIRELESS MICROPHONES AND TRANSMITTERS
- INSTRUMENT STRINGS
- KEYBOARDS
- DRUMS and PERCUSSION
- DEEJAY
- SOUND EQUIPMENT
- CONFERENCE SYSTEMS
- LIGHTING
- CABLES and CONNECTORS
- VIDEO
- WIND INSTRUMENTS
- STRING QUARTETS
- TRADITIONAL INSTRUMENTS
- OUR BEST SELLERS
- STORE FITTINGS
- Manouche Guitars
RADIAL ENGINEERING SW4 Racks - 4 channel audio switcher
Racks - 4-channel audio switcher
Each of the 4 channels is equipped with 2 XLR inputs and an isolated output transformer, capable of handling +20 dB of signal at all frequencies. This makes the SW4 equally viable for both wireless mic systems and mixing console switching. Channels can be 'linked' in stereo, triple or quad switching and additional SW4s can be associated with larger configurations, remotely controlled if required.
Channel1 is enhanced with a 'mix' function that passively sums the 2 inputs together for simultaneous use.All channels are routed to a Master bus, respectively 1/3 assigned to the left, and 2/4 to the right.
To monitor, each channel, the SW4 is equipped with a 3-position PFL switch that selects between source A, B or the stereo bus via the built-in headphone amp. The bus can be switched to mono when used with wireless guitar systems. This is complemented by 2 isolated guitar outputs and a global level control with a mono output on the front panel for 'attacking a monitor amp, tuner or guitar amp.
These combined features make the Radial SW4 the ideal choice for backup systems or switching multiple audio channels simultaneously.
- THD: 0.002% @ 1 kHz
- Display: LED
- Category: switch
- Digital conversion: no
- Inputs: 2 x XLR
- Outputs: 2 x jack, 2 x XLR, headphones, XLR
- Settings: Input gains, master bus enable, output level, PFL, input selector, input summing
- Power supply: Phantom powered
- Frequency response: 10 Hz - 40 kHz
- Dimensions (mm): 445 x 152 x 44
- Weight (kg): 3.50 kg
- Lights: No
- Built-in preamp: No
- Max input level (dBu): 26
- Rack unit: 1
- No. of channels: 4
- Additional specs: - Technology: passive transformers, with relay switching
- Splitter type: 4 AB selectors
- Bus Master output, assignable to mono or stereo
- Transformers: Eclipse ET-LD2
- Dynamic range: 136 dB
- Input impedance: 160 Ω balanced
- Output impedance: 500 Ω balanced
- Very rugged construction: 1.55 mm steel chassis
Specific References
- SRA SW4
- 0676101041299